In this short FAQ we will show you the correct settings for having CouchPotato connect with rUtorrent. Be sure to check 'advanced' within the settings to see all options below. Settings: SSL Enable: on SSL Verify: off SSL CA Bundle: none (keep empty) Host: 127.0.0.1:443 RPC URL: /seedit4me Authentication: Basic Username: seedit4me Password: {your seedit4me password} Label: your choice if and what to input here Directory: none (keep empty…

Once you have installed Jackett you can open the app via your GUI, just click on the [open] button on to the app card. To use Jackett you will need to configure either a torrent site or a newsgroup, either can be found in the Jacket Wiki.Jacket configurationYou will need the following settings to configure Jackett correctly for use on Seedit4.meJackett urls need to be formatted as: http://127.0.0.1:9117/jackett/api/v2.0/indexers/all/results/torznab/Upd…

How to setup Ombi for Emby:Open up Omby via your DashboardClick NextChoose EmbyFill in the following details (default, unless you have changed them manually)Emby Hostname or IP Address: 127.0.0.1Port: 8096 or 8920 for SSLChoose SSL or not, be sure to pick the correct port in the previous stepCopy the API key from your Emby server, if you're not sure where to get it then use this guideClick nextFill in your admin details for Ombi, with this account you can manage O…

Sonarr/Radarr/Whisparr can be configured on your server with either rTorrent or Deluge as the download client. Be sure to enable Advanced Options in Sonarr/Radarr. To configure local/internal only access: rTorrent:As base URL is needed you need to click show advanced top left on settings page: Host: 127.0.0.1 Port: 443 URL Path: /seedit4me Or /rutorrent/plugins/httprpc/action.php Username: seedit4me Password: {your seedit4me password} SSL…

After installing Syncthing you can open the app via your dashboard. Once opened you will see an empty Syncthing gui. To have Syncthing work you will need to configure two things: your slot on Seedit4.me and the client (like your home PC) you want to sync a folder with.Configuring your Seedit4.me slotAfter installing Syncthing you will first need to setup a port forward for Syncthing to work. You can use this guide to do so, your internal port will be 22000. Be sure …

When you first install Nextcloud and open the app, you will be presented with a configuration screen. You can use the following settings to finish the installation:Database user: nextcloud Database password: your dashboard password Database name: nextcloud Datababase host: localhostThis system has now been updated all you need to do is install the app and them login with username seedit4me and your seedbox password

Connect Sonarr/Radarr to SABnzbd by following these simple steps below.Open sonarr/radarr download client and click SABnzbdSet ip to 127.0.0.1Set port to 65080 or the port listed in SABnzbd Port on the SAB app under sabnzbd/config/general/type your username seedit4meand your seedbox password in No SSLTake the API key from the SABnzbd app and click test, it should now connect.

To have Flood communicate with rtorrent install Flood and then open it via your dashboard.On "Create an account" page you can use the following settings:Username: seedit4mePassword: your seedbox passwordrTorrent Connection Type: Unix SocketrTorrent socket: /var/run/seedit4me/.rtorrent.sock

This guide will help you setup Medusa for use on Seedit4.me, as an example we will use the tracker 'Torrentleech.org'.First install Medusa and open it via your DashboardOpen up the [Search settings]  in MedusaRemove all Public Trackers from Episode Search and save changesClick Torrent Search set the blackhole folder to /home/seedit4me/rwatch and save changesClick…

Install Sickrage and open the app via your dashboardIn Sickrage, click config and then [Search]Depending on your preference, either enable NZB, Torrents or both.For torrents, use the Black hole settings for your preferred client. As an example we've used rtorrent.For NZB you can choose different options. If you want to use SABnzb you will need to install extra's, then fill in the details. An example is shown below.Now in Sickrage click config and then [Media Pr…

This guide will take you through the Organizr installation Wizard and help you put in the correct settings for use on our system. This guide is only for users on our old environment, as the new PVE servers will configure Organizr automatically.Prepare a directoryThe oragnizer wizard will want to put its database into an accessible directory. We have to create one first, our suggestion would be to create a directory called organizr-db. You can either use FTP or SSH to connect to …

WARNING!!! When using remote desktop do NOT save anything to root always save data to /home/seedit4me, If you save to root it will cause your seedbox to crash and it will be formatted without noticeThis guide will take you through the initial installation and configuration to use X2GO. To get started, first install the application via the Dashboard and once that is done, enable SSH on your slot. Once that is done you need to download and install the client you want to use, d…

On your Local Sonarr/Radarr use these settings Your Host it will be something like 734.gsb2.seedit4.mePort 443Tick use SSLUrl Base /nzbgetyour username seedit4meyour seedbox password if you get an error about Category your need to set them up on the NZBget app via your dash save and done

To configure external access (i.e. run Sonarr/Radarr on your local machine):Open the Nzbhyder app Click on Main  change Host to 0.0.0.0SaveCopy your API keyset your Indexers and Categories SaveAdd a new port to your slot and link it to internal port 5076 (It can take up to 15 mins for the port to open)Copy the external portOpen settings on your Sonarr/Radarr on your local pc and click Indexersadd N…

In order to connect NZBHydra to Sonarr/Radarr, you need to have at least 1 indexer set up in Hydra (Sonarr/Radarr will error when trying to connect if none are set)Open NZBHydra and set up a Usenet and/or Torrent indexesand also take a copy of your Hydra API keyIf you plan to use Hydra for both Usenet AND torrents in Sonarr/Radarr, you need to add it twice, once as Newznab and once as TorznabOn your Sonarr/Radarr use these settings&…

Introduction:Google recently made a change to the API authentication method which has resulted in new Rclone connections giving the following error when you try to configure Google Drive on Seedboxes. This guide provides step by step guidance on what needs to be done as a workaround.

Autobrr monitors IRC announce channels and torznab RSS feeds to get releases as soon as they are available, with good filtering, and regex support. Autobrr is a modern single binary replacement for the autodl-irssi+rutorrent plugin.Step 1: Installer AutobrrHead over to your dashboard, hit the hamburger menu on the Autobrr card and click on install. Once installed your can use the hamburger menu again to open the application. You can login with username seedit4me and you…

This App has no GUI on seedit4me, it will work in the background with Jdownloader.org as main point of new downloads.Step1: Make an accountFirst you need to make an account on Jdownloader, if you do not have one already. Go to Jdownloader.org and make a new account, be sure to make a note of the email and password you've used. You will need those later.Step 2: Install JdownloaderHead over to your dashboard, hit the hamburger menu on the Jdownloader card and ins…

Warning: The Unpacker app works with CLI only, meaning you will need to login to your slot via SSH and type words to get it working. This guide will cover the basic setup only, please use the Unpackerr GitHub page for more advanced questions.Step 1: Install UnpackerrUse the appropriate tile on your dashboard to install Unpackerr, it will install all the necesarry components on your slot so you can start working via CLI.Step 2: Connect to your slot via SSHUse our SS…

To use this app you need to install either Jackeet or Prowlarr. After you've installed FlareSolverr you can use it to have Jackett or Prowlarr circumvent the Cloudflare protection pages.Configure JackettOpen up Jackett and scroll down to 'FlareSolverr API URL' and input: http://127.0.0.1:8191/. Hit save and you should be all set.Configure ProwlarProwlarr Go to settings Indexers Add Flaresolverr  name FlareSolveer Host http://localhost:8191/…

Please see https://github.com/plexdrive/plexdrive/blob/master/TUTORIAL.md for details on this app seedit4me offer no support or advice on CLI apps only use if you know what your doing